ADAS Calibration Tools
Filter Products
Filter Products
- Car Brands
- Motorcycle Brands
- Truck Brands
ADAS Calibration Tools
Showing the single result
What Is ADAS Calibration, and Why Does It Matter?
Your car’s Advanced Driver Assistance System (ADAS), which includes lane departure warning, automatic emergency braking, adaptive cruise control, blind-spot monitoring, and forward collision warning, relies on precisely positioned cameras, radar units, and ultrasonic sensors to work. Even a millimetre of shift in the camera's mounting angle can cause these systems to misjudge distances, lane positions, or obstacle detection thresholds.
For ADAS calibration, experts use specialist equipment to verify that each sensor and camera is correctly aligned and operating within its design parameters, then adjust the system digitally until it reads reference targets or road conditions accurately. If you don’t calibrate the system after relevant repair work, these safety systems may appear functional while actually operating incorrectly, which is a risk you can’t always detect.
The Difference Between Static and Dynamic ADAS Calibration
Static calibration involves ADAS calibration in a workshop with the vehicle staying stationary on a level floor. Patterned target boards or laser alignment devices are placed at precise, manufacturer-specified distances and angles in front of the vehicle. The camera or sensor is then adjusted digitally, via the vehicle's diagnostic system, until it correctly reads the target boards. But this needs controlled indoor conditions, including a level floor, suitable lighting, and accurately placed targets.
Dynamic calibration takes place on the road. You drive the vehicle at a set speed under specific conditions, which include certain road types, clear lane markings, and sufficient lighting, so the ADAS system recalibrates using real-world reference points as the vehicle moves. Some systems can only be calibrated dynamically, while others require static calibration first, but many require both.
The method you need to use depends entirely on the manufacturer's requirements for that specific vehicle, camera, and system.
When Your Car Needs ADAS Calibration
Your car needs ADAS calibration after:
- Windscreen replacement, where the forward-facing camera is mounted on or near the glass
- Camera or radar disconnection or replacement
- Suspension or ride-height changes that alter the angle at which cameras and sensors face the road (see our suspension calibration reset tools category for more information)
- Wheel alignment, which changes the relationship between the vehicle's direction and the camera's field of view (see our steering angle sensor reset tools category for more information)
- Collision repair involving the front or sides of the vehicle
- Certain manufacturer software updates
The UK Insurance Requirement for ADAS Calibration
Since 2021, the UK insurance industry has official requirements that ADAS-equipped vehicles undergoing repair must have their ADAS systems checked and recalibrated if needed before being returned to the customer. This applies to bodyshops and garages carrying out relevant repair work, not to individual owners. There’s also a specific British Standard, BS AU 242b:2022, covering ADAS-supporting windscreens and the calibration requirements that apply when they’re replaced.
Together, these requirements mean ADAS calibration isn’t an optional extra for commercial repairers, but an expected part of the repair process for any vehicle with ADAS fitted.
Is ADAS Calibration a DIY Job?
No, ADAS calibration requires specialist equipment for target board placement and measurement, a controlled workshop environment (for static calibration), trained technicians who understand the manufacturer-specific requirements for each vehicle, and diagnostic software capable of communicating with the ADAS control modules. This is also why the equipment on this page is professional and bodyshop-grade rather than consumer-level. If your car needs ADAS calibration, this is a job for a specialist ADAS calibration centre or a bodyshop with the right equipment. You can check out our full guide to ADAS calibration for further guidance.
Our ADAS Calibration Equipment
The TOPDON Phoenix ADAS Mobile Calibration Tool, available for £11,994, is a professional-grade mobile static and dynamic calibration rig. It’s the kind of investment made by a dedicated ADAS calibration centre or bodyshop carrying out significant volumes of windscreen and collision repair work. It’s not a consumer scanner or a workshop diagnostic tablet; it’s a complete, mobile calibration system. If you’re researching whether this level of equipment is right for your operation, our full guide to ADAS calibration covers what the work involves before you evaluate the investment.
ADAS Calibration FAQs
What is ADAS calibration and why is it needed?
ADAS calibration realigns your vehicle's camera and sensor-based safety systems, including lane assist, automatic emergency braking, and adaptive cruise control, after work that could disturb their position, so they continue to function accurately. Without calibration after relevant repair work, these systems may appear to function normally while actually operating outside their design parameters.
Do I need ADAS calibration after a windscreen replacement?
Often, yes. Many ADAS-equipped vehicles have a forward-facing camera mounted on or near the windscreen. Even a slight shift in the camera's position during replacement can affect how accurately it reads lane markings, obstacles, and distance. Whether your car needs calibration depends on the specific vehicle and camera type, so your repairer should confirm this as part of the windscreen replacement process.
What's the difference between static and dynamic ADAS calibration?
Static calibration is performed in a workshop using target boards placed at precise distances and angles while the vehicle is stationary. Dynamic calibration is performed by driving the vehicle under specific conditions so the system recalibrates using real-world road references. Many vehicles require one or both methods, depending on the manufacturer's requirements for that specific system.
Is ADAS calibration required by law or insurance in the UK?
Since 2021, the UK insurance industry requires ADAS-equipped vehicles undergoing repair to have their ADAS checked and recalibrated if needed before being returned to the customer. The British Standard BS AU 242b:2022 also covers calibration requirements for ADAS-supporting windscreens. These requirements apply to commercial repairers, not individual vehicle owners.